RUSSIAN
About the exhibition
Exhibit
Visit
Online catalogue
Brands
Personal account
Contacts
Interactive floor plan
List of participants
Clear
Russia
Belarus
Brazil
Brunei
China
Germany
India
Indonesia
Iran
Israel
Italy
Kazakhstan
South Korea
Taiwan
Türkiye
UAE
Uzbekistan
1. MACHINERY AND EQUIPMENT FOR THE PRODUCTION OF POLYMER MATERIALS, RUBBERS AND PRODUCTS FROM THEM
.. 1.1. Machines and installations for the production of polymer products and materials
.... 1.1.1 Extruders and extrusion plants
.... 1.1.2 Mixers
.... 1.1.3 Granulators
.... 1.1.4 Compounding lines
.... 1.1.5 Injection molding machines
.... 1.1.6 Blow molding machines
.... 1.1.7 Presses
.... 1.1.8 Machines for the production of foam and processing of reactive resins, including resins with an amplifier
.... 1.1.9 Other machinery and equipment for processing
.... 1.1.10 Other processing equipment and production lines
.. 1.2 Equipment for final processing
.. 1.3 Equipment and devices for exterior finishing, coating, printing and marking
.. 1.4 Welding equipment
.. 1.5. Molds and dies
.... 1.5.1. Injection and compression moulds
.... 1.5.2. Blow moulds
.... 1.5.3. Extrusion dies
.... 1.5.4. Standard parts of moulds
.... 1.5.5. Hotrunner systems
.... 1.5.6. Moulds
.. 1.6 Process automation and robotics
.. 1.7 Peripheral devices
.. 1.8 Devices for measuring, controlling, adjusting and monitoring
.. 1.9 Parts, assemblies
2. RAW MATERIALS AND AUXILIARY MATERIALS
.. 2.1 Thermoplastics
.. 2.2 Thermoplastic elastomers
.. 2.3 Duroplasts
.. 2.4 Foams and auxiliary products
.. 2.5 Rubbers
.. 2.6 Synthetic fibers, coarse monofilament
.. 2.8 Coatings, applied masses
.. 2.9 Adhesives and adhesives
.. 2.10 Resins for varnishes
.. 2.11 Additives
.. 2.12 Fillers
.. 2.13 Reinforced fibers, reinforced materials
.. 2.14 Consumables, auxiliary products, polymerization auxiliary materials
.. 2.15 Processing of raw materials/recycle
.. 2.16 Masterbatches
.. 2.18 Other raw materials and auxiliaries
3. PRODUCTS MADE OF POLYMER MATERIALS AND RUBBERS
.. 3.1 Parts obtained by blow molding
.. 3.2 Products produced by extrusion
.. 3.3 Production/production of reinforced plastics (composite materials)
.. 3.4 Products obtained in the calendering process
.. 3.5 Laminated parts
.. 3.6 Parts produced by mechanical processing
.. 3.7 Parts produced by compression pressing
.. 3.8 Parts produced by rotary molding
.. 3.10 Parts made by injection molding
.. 3.11 Parts produced by thermoforming
4. SERVICES FOR THE SYNTHETIC MATERIALS AND RUBBER INDUSTRY
.. 4.1 Engineering consulting
.. 4.2 Computer service
.. 4.3 Research
.. 4.7 Specialized associations and associations
.. 4.8 Specialized literature
.. 4.9 Leasing
.. 4.10 Education and development training
.. 4.11 Transport and logistics services, warehouse
5. RECYCLING SOLUTIONS
.. 5.1. Equipment and machinery for waste management and recycling of polymers and rubbers
.... 5.1.1. Separation technology
.... 5.1.2. Plastic shredders and crushers
.... 5.1.3. Washing and drying systems
.... 5.1.4. Water treatment and filtration systems
.... 5.1.5. Plastcompactors/ Agglomeration equipment
.... 5.1.6. Compounding and granulation
.... 5.1.7. Transportation and storage
.... 5.1.8. Ancillary equipment for plastic recycling
.. 5.2. Recycling raw materials/ recyclates, additives and fillers
6. ADDITIVE MANUFACTURING
.. 6.1 Equipment and systems for additive manufacturing
.. 6.2 Materials for additive manufacturing
.. 6.3 Additional systems and components for additive manufacturing
.. 6.4 Services and service for additive manufacturing
1. Packaging machines and devices
.. 1.1. Preparing and feeding
.... 1.1.2. Machines to insert package inserts
.... 1.1.5. Machines for the assembly of packaging and packaging components (e.g. dosing pumps, syringes, drug delivery systems)
.. 1.3. Final packaging, material flow, logistics
.. 1.5. Inspection and control
.... 1.5.1. Checkweighers
.. 1.6. Additional machines and devices in the packaging process
2. Ready packaging
.. 2.1. Plastic packaging (granulate, film)
.. 2.9. Other packaging
3. Labels
4. Packaging materials, packaging production aids, packagings and packaging accessories
.. 4.1. Packaging materials
.... 4.1.6. Plastic (pellets, films)
.. 4.2. Packaging production aids
.... 4.2.1. Adhesives / Glues
.... 4.2.2. Chemicals and other additives
5. Machines and equipment for the production of packaging and packaging aid
.. 5.1. Machines and equipment for the production of plastic packaging
.... 5.1.1. Complete lines for the production of plastic packaging
.... 5.1.2. Single machines/equipment for the production of plastic packaging
.... 5.1.3. Operating and auxiliary equipment for the production of plastic packaging
.. 5.2. Machines and equipment for the production of paper/cardboard packaging
.... 5.2.3. Operating and auxiliary equipment for the production of paper/cardboard packaging
.. 5.3. Machines and equipment for the production of metal packaging
.... 5.3.3. Operating and auxiliary equipment for the production of metal packaging
.. 5.4. Machines and equipment for the production of glass packaging
.... 5.4.3. Operating and auxiliary equipment for the production of glass packaging
.. 5.5. Machines and equipment for the production of wood packaging
.... 5.5.2. Single machines/equipment for the production of wood packaging
.. 5.7. Machines and equipment for the production of textile packaging
.... 5.7.2. Single machines/equipment for the production of textile packaging
6. Machines and equipment for beverage production
.. 6.1. Complete lines for beverage production
.... 6.1.4. Complex lines for dairy products production
.. 6.2. Single machines/equipment for beverage production
.. 6.4. Operating and auxiliary equipment for beverage production
.... 6.4.7. Heating, heat keeping and cooling equipment
7. Machines and equipment for manufacturing foodstuffs, confectionery and bakery products
.. 7.3. Operating and auxiliary equipment for manufacturing foodstuffs, confectionery and bakery products
8. Machines and equipment for the production of pharmaceuticals and cosmetics
.. 8.3. Operating and auxiliary equipment for the production of pharmaceutical and cosmetic products
9. Automation technology /Components / Accessories
.. 9.1. Colling units
.. 9.7. Corrosion protecting materials
10. Storage, logistics and transport equipment for packaging production (all kind of packaging)
11. Recycling and environmental technologies
.. 11.1. Complete lines for recycling and environmental technologies
.... 11.1.6. Recycling of paper/card board packagings
.... 11.1.7. Recycling of PET packagings
.... 11.1.8. Recycling of plastic packagings
.. 11.2. Single machines/equipment for recycling and environmental technologies
.... 11.2.1. Balers
.... 11.2.5. Granulators
.... 11.2.6. Milling and grinding plants
.... 11.2.7. Separation and sorting systems
.... 11.2.8. Shredder
.... 11.2.9. Sieving machines
.... 11.2.11. Washing systems and equipment
12. Services
.. 12.1. Business support
Pavilion 2, Hall 1
Pavilion 2, Hall 2
Pavilion 2, Hall 3
Pavilion 8, Hall 3
Pavilion FORUM
Brand
Exhibitor
2D Kimya San ve Tic. Ltd. Şti.
Stand:
FOB50
2D Chemical, develops, produces and sells colorants and additives for the plastic industry. Our ruling principal is to work with leading and best raw material manufacturers and suppliers in the world that can meet our different and professional vision. Our industry knowledge and experience is for more than 20 years and we believe customer-oriented company aims to have maximum customer satisfaction. 2D Chemical sells its products in domestic and in international markets with a strong customer focus. We compete in the markets with the largest
3Meksan Kalıp ve Plastik San Tic A.Ş.
Stand:
22E14
3meksan Mold and Plastic A.Ş Production of your request produces world classes using the most qualified materials of the molds. Certified materials are used to ensure that Production and AR & amp; It aims to maintain sustainable quality standards by supporting the innovative and creative approach of the GE team. By meticulously monitoring the processes of sales and production policy, it maximizes customer satisfaction.
3D VISION, LLC
Stand:
3F10
Center for Additive Technologies.
A-TEKH-PRINT
Stand:
3G09
Оборудование для аддитивного производства. Услуги 3D печати.
Avaksy, Ltd
Stand:
22A12
Инжиниринговая компания ООО «АВАКСИС» предлагает широкий спектр услуг от разработки изделия до внедрения пресс-форм на производство. Благодаря команде инженеров с опытом более 15 лет в производстве пресс-форм мы готовы реализовать проект любой сложности. Мы гарантируем, что Вы получите качественный и надежный продукт, полностью отвечающий требованиям современного производства. Наши пресс-формы производятся в оптимальные сроки по приемлемой стоимости с соблюдением высоких стандартов качества.
AvangardPLAST, LLC
Stand:
82B06
AvangardPLAST was founded in 2007. Since 2014, the company has been successfully engaged in the automation of production using robotic systems of its own design and production under the GRINIK ROBOTICS brand.
August Borg IAC
Stand:
81A16
Free of charge information books “Modern packaging and labeling”, “All printing Moscow + Russia”, “Suppliers of printing materials and equipment”. Information on printing, packaging, labeling and souvenirs companies. Since 1996. Free publication
Avexx, LLC
Stand:
22D14
Official representative in Russia and the CIS of leading European equipment manufacturers: OMIPA, ICMA San Giorgio, PROMIX SOLUTIONS, SAMP, ADLER, SAUERESSIG, FAP, GAMMA MECCANICA, SOREMA. Sales, adjustment, service, training. Extrusion lines under own brand AVEXX.
AURORA, LLC
Stand:
3F27
Компания «АВРОРА» была основана в 1993 году и динамично развивалась как торгово-сервисная компания по поставке и техническому обслуживанию импортного лабораторного оборудования, только выходившего на рынок России в 90-е годы прошлого века. Новые задачи, которые возникают в сфере экологии, медицины, науки, машиностроения и во многих других отраслях, требуют всё более точного лабораторного анализа, поэтому с годами многократно возрастает сложность предлагаемого нами оборудования и количество сфер его применения.
Avtonics Rus, LLC
Stand:
82A21
Autonics is a globally trusted provider of industrial automation solutions from South Korea. We develop and manufacture a wide range of automation products which are marketed worldwide. Our core products include various sensors, controllers, motion devices, measuring equipment, laser marking systems, connection equipment and more. Our products are trusted and adopted by engineers in various industrial applications and our technology is widely applied in day-to-day automation devices.
ADVANCED PLASTIC ENGINEERING, LLC (APE)
Stand:
23C27
APE works with the largest companies in Russia and the CIS countries in the field of plastic pipe extrusion. Today we present on the market a wide range of equipment from our partners: Italian companies FB Balzanelli, IPM, MainTech, German company Unicor etc. Together we provide our customers with the necessary support, including the selection and purchase of equipment, its delivery, commissioning and the provision of further warranty and post-warranty technical support
ADITIM, LLC
Stand:
FOF47
Aditim is a diversified holding with offices in Russia, the CIS, China and Europe. It has been operating at the market for over 20 years. Areas of interest: • production of polyamide thermal inserts, facade thermal insulators, foamed profiles • import and export of raw materials and industrial equipment • development of special products and recipes • engineering, project activity • laboratory research • social projects
Azimut Trade, Ltd
Stand:
FOA29
AzimutTrade is a company selling raw materials for the production of polymer products.
Aleko Machinery, LLC
Stand:
22B04
Aleko Machinery is Russia's largest manufacturer and supplier of polymer equipment, operating since 1998. We produce blown film machines, dosing systems, thickness control systems, shredders, crushers and pelletizing systems.
ALTERVIA
Stand:
3A29
ALTERVIA is a leading supplier for the sectors clamping technology, standard elements and operating parts. ALTERVIA is the official representative of world manufacturers Kipp, Emes, Kukamet. Domestic products are sold under the Altervia brand. Advantages for customers: • Huge assortment: adjustable clamping levers, handles, palm grip, disc and star grip, toggle clamps, handwheel, pull handles, locking bolt, rubber buffers, hinges and so on. • Stock availability • 2 warehouses in Russia: Moscow, St. Petersburg, • Door-to-d
ALPA OOO
Stand:
3D27
Наша компания осуществляет поставку импортных комплектующих для промышленного оборудования. Работаем напрямую с импортерами и производителями, более 17 лет опыта работы с различными областями производства. Успешные поставки запчастей для Demag, Arburg, KraussMaffei, Husky, Nestal.
ALTAIR NPP OOO
Stand:
FOB56
Altair is a developer and manufacturer of a wide range of structural polymer materials, produced according to its own specifications and meeting the highest requirements of the modern polymer market.
Аlfa-FTOR LLC
Stand:
FOD67
Supply of rubbers (CR, FKM, HNBR), fluoropolymers, polymer additives (PPA), curing systems. Manufacturing of FKM compounds and finished items. Elaboration of customized recipes and technologies
Alliance-Prom, LLC
Stand:
21A04
The ALLIANCE-PROM company is the official Russian representative of the largest Chinese factories: NINGBO HAIXING MACHINERY is a manufacturer of high-tech TPA of European quality. In Russia, it is represented by the TITAN GL and CHROME GL series. WENSUI GROUP is a manufacturer of peripheral equipment and robotics . L.K. MACHINERY is the world's largest manufacturer of equipment for injection molding of non-ferrous metals and alloys. Delivery on FOB and DDP terms. Warranty and post-warranty service.
ANDCARB
Stand:
FC06
Благодаря технологической инфраструктуре, мы предлагаем клиентам во всем мире продукцию международного стандарта. Сертификаты ISO 9001, ISO 14001 и OHSAS 18001 по обеспечению качества и управлению. Использование микрокальцита возможно во многих отраслях промышленности, в основном в производстве экструзии ПВХ, инженерных пластмасс, полиэтиленовой пленки, бумаги ЛКМ и гранул.
ANID-POLYAMIDES
Stand:
FOA49
Компания АНИД основана в 1997 году. Является ведущим производителем полимерной продукции, а именно первичного полиамида, композиций на основе различных марок полиамида, изделий из литьевого полиамида и пластика.
ANISOPRINT RUS, LLC
Stand:
3F08
Anisoprint Rus is the distributor of ANISOPRINT in the territory of the RF and the countries of the Customs Union. We not only supply equipment, but also provide printing services. Our company is the only organization that manufactures composite products using 3D printing to order.
ANION, LLC
Stand:
FOB16
PRODUCTION OF PLASTIC PRODUCTS
AP-PROJECT, LLC
Stand:
3F15
The AP-Project company has rich experience in the field of custom-made prototypes, 3d printing of any products and parts on professional equipment using various technologies. The main direction of the company is a service for the manufacture of plastic cases and parts to order by casting into silicone molds.
Aleko Polymers, LLC
Stand:
FOE17
The aleko group of companies is one of the largest suppliers, and since 2022 it has also been a manufacturer of polymer additives in Russia under the brand A-Len. The assortment of A-Len includes additive masterbatches, filler masterbatches and color masterbatches.
Argolis-Polychem, Ltd
Stand:
FOB09
Argolis-Polichem Ltd is the official distributor of SABIC, a world leader in the production of chemical products. We supply polyethylene (LLDPE, LDPE, HDPE), polypropylene, rubbers (EPDM, BR, EVA), polycarbonate and ABS plastic of Arab and European production. Deliveries are made both from stock in our warehouses in Russia and to order. Thanks to a well-functioning logistics system, we meet the promised deadlines. We highly value our customers, are interested in their development and provide support at all stages of the deal.
ARKOLI private enterprise
Stand:
FOF13
Основными принципами деятельности компании являются работа с производителями: осуществляющими производство высокотехнологичной и инновационной химической продукции; обладающими кадровым потенциалом, позволяющим обеспечить предоставление квалифицированного и оперативного технологического сопровождения на всех этапах использования химической продукции.
Армамид (ПА)
Stand:
FOD29
Под торговой маркой "Армамид" НПП "ПОЛИПЛАСТИК" производит наполненные и модифицированные композиции на основе ударопрочного полиамида.
Армлен (ПП)
Stand:
FOD29
Наполненные и модифицированные композиции на основе полипропилена лидера российского компаундирования НПП "ПОЛИПЛАСТИК".
ASTAT, LLC
Stand:
FOA36
"ASTAT" is a distributor of AVIENT, the world's largest manufacturer of superconcentrates of dyes and additives for all types of plastics and their processing methods.
ATECO, LLC
Stand:
3F13
ATECO - Российский производитель химии, полимеров и оборудования для аддитивных технологий с 2021 года. Матирующие спреи для сканирования, адгезивные составы, разработка собственных полимеров как для литья так и для 3D печати. Разработка и производство принтеров по технологии FGF и FFF а так-же дополнительного оборудования.
ATLAS
Stand:
3G21
ПРОИЗВОДСТВО: Крышек и ручек для ПЭТ-тары Одни из крупнейших производителей в УРФО Современное европейское оборудование Всегда в наличии на нашем складе
ATLAS, LLC
Stand:
FOD07
Atlas LLC is one of the leading manufacturers of PVC plastic compound, EVA sheets, EVA compound, and supplier of EVA copolymer. The experience and knowledge of the company’s specialists, quality control of raw materials and finished products allow us to satisfy the needs of consumers. Our own production facilities allow us to annually increase production volumes and occupy a leading position in the EVA and PVC market. We are ready to produce your order in the shortest possible time. You can also purchase finished products in bulk.
ATLASMASH, LLC
Stand:
22C02
ATLASMASH is a Russian manufacturer of modern high-tech and high-quality equipment for recycling waste plastics with many years of experience in production.
Afaya, JSC
Stand:
FOB37
Having experience of successful work since 1998, Afaya JSC is now one of the leading suppliers of raw materials for the coatings manufacturing industry, dry building mixes, tinting of structural materials, plastics, rubber and other materials in Russia. The company is also engaged in tinting equipment supplies. Within the years of our existence Afaya JSC gained a firm position on the Russian chemical raw materials market in the segment of pigments and additives for different spheres of application.
BALITEH, LLC
Stand:
21C16
Equipment. Engineering. Service. We supply a wide range of plastics processing equipment for injection molding, extrusion, blow molding and thermoforming, peripherals and accessories. We provide warranty and post-warranty service, diagnostics and repair, spare parts, manufacturing of screws. Recommendations for selection, use, disposal and connection of the equipment.
BARS-2, LLC
Stand:
FOC39
OOO NPF BARS-2 has been producing masterbatches for thermoplastics under the trademark BASCO for 30 years. OOO NPF BARS-2 is the leader in the development and production of masterbatches for coloring and modification of almost all types of plastics processed by the industry.
Bashkir Soda Company, JSC
Stand:
FOC42
BSK produces a wide range of chemical products: soda and caustic ash, refined sodium bicarbonate (baking soda), PVC, cable compounds, hydrochloric acid, white carbon, calcium chloride.
Belneftehim-ROS, LLC
Stand:
FOB38
ООО «Белнефтехим-РОС» - дочернее предприятие Концерна «Белнефтехим» РБ, официальный дилер ОАО «Нафтан» завод «Полимир». Осуществляет оптовую торговлю ПЭВД (ОАО «Нафтан» завод «Полимир», Новополоцк).
Bestar Machinery
Stand:
22B38
Extrusion blow moulding machines to produce bottles, flasks, jars, jerry cans and technical parts from polyethylene, polypropylene and other materials. In short, BESTAR is European class machine at a reasonable price. Sounds like a pure advertisement, but we suggest you to learn this equipment closer and make sure that it's the reality.
BusinessPlast, LLC
Stand:
23E05
The Kaluzhsky mold factory manufactures molds based on 3D models, design drawings, product samples and produces plastic molding by injection molding! The plant has been operating for more than 20 years. During this time, we have made thousands of molds of varying degrees of complexity.The company has at its disposal a fleet of injection molding machines, tool production, and an electric erosion site. In the shortest possible time, we can create molds of any degree of complexity, and further carry out their maintenance and repair.
BIM Engineering, LLC
Stand:
21B22
Auxiliary equipment for plastics processing, production engineering, automation systems, supervision software. Water cooling systems. Size reduction equipment. Fast cooplings. Purging materials. Professional cleaning agents. Static mixers.
Biochimplat, LLC
Stand:
FOD62
Development and production of granulated PVC compositions for extrusion and injection molding industries. PVC-compounds for the production of cable products and consumer goods, applications in construction, medicine and other industries.
BEETRAFIC LLC
Stand:
23E13
BEETRAFFIC offers unique high-performance servicing in the following fields: - shipping in BULK, expedited cargo container service - transportation of various cargoes (full containers, groupage, OUTSIZED cargoes) - We are seasoned professionals in logistics, customs clearance, certification - We import from Europe, Japan, USA, and worldwide - We have offices in Moscow and Vladivostok - We have representative offices in United Arab Emirates, Lithuania, South Korea - We specialize in delivering cargoes from China, South Korea, India, Europe to R
BLISTERPROM LLC
Stand:
81B30
Blisterprom company is a large manufacturer of various plastic packaging, such as blisters, korreks, lodgements, flowpack packaging. Our clients are pharmaceutical companies, food industry, manufacturers of small consumer electronics, etc.panies
BORCHE Machinery LLC
Stand:
21С27
BORCHE Machinery is a leader in the development and production of energy-efficient IMM (injection molding machines) from 60 to 9,000 tons for all major types of casting - high-precision, high-speed, dimensional, multicomponent, technical, mass. • Selection and delivery of the optimal injection molding complex based on BORCHE IMM; • Solutions for automation of injection molding production; • Maintenance and diagnostics of BORCHE IMM; • Advanced training courses and staff training; • Warehouses of ready-made IMM BORCHE in the Russian Federation.
BRUNNEN, LLC
Stand:
FOB01
BRUNNEN is one of the leading manufacturers of seals and components for various industries. Our product line includes TPE seals designed for use in aluminum translucent structures and PVC windows of almost all available Russian systems.
Babyplast-Russia (VL-Plast),LLC
Stand:
21B01
Babyplast injection molding machines occupy a leading global position in the production of small and micro parts from all types of thermoplastic polymers for all industries. We provide a full range of services: equipment supply, commissioning, personnel training.
1
2
3
4
5
6
7
8
9
10
Events
Companies
About
For visitors
For organizations
For organizers
Contacts
HELP